How can we help you?
Reset a Router or 3-in-1 to Factory Default
12 months ago
| Article no. 1317
Introduction
Resolution Steps
-
Pace 3-in-1, Arris 3-in-1, E1000, E1200, EA2500, EA2700 and EA2750
- With the Gateway powered on, press and hold the reset button for at least 30 seconds
- Continue to hold the reset button while you remove the power cord from the back of the Gateway
- Continue holding the reset button and plug the power cord back in, then release the reset button
WRT54G and WGC200
- Open a web browser and type http://192.168.1.1 in the address bar and hit Enter
- Enter the Username and Password, then click OK
- Username: leave this space blank
- Password: admin
- Go to Administration, then click the Factory Defaults link
- Select Yes on Restore Factory Defaults and click Save Settings
BEFCMUH
- Open a web browser and type http://192.168.0.1 in the address bar and hit Enter
- Enter the Username and Password, then click OK
- Username: leave this space blank
- Password: admin
- Click on Status, then click the Security tab
- Select Yes for Restore Factory Defaults and click Apply
Internal Information
Commercial Agent Steps
Financial Agent Steps
Management Steps