How can we help you?

TiVo Remote Programming Code Search

 

Introduction



For step-by-step instructions on programming the TiVo remote

  • 4 Tuners, 2 Tuners, Single Tuners, and Minis on TiVo Experience 3

    • Go to TiVo CentralSettings & Messages | Settings | Remote, CableCARD, & Devices | Remote Control Setup (see steps)

  • 4K 6 Tuners, 6 Tuners , 4K Minis, and Minis on TiVo Experience 4

    • Go to TiVo Home | arrow left to Menu | Settings | Remote, CableCARD, & Devices | Remote Control Setup (see steps)

Resolution Steps

 

TV Power and Volume Control Code Search

  1. Cover the end of the TiVo remote control with your hand
     
  2. Hold down both the TiVo and TV Power buttons simultaneously until the light on remote remains lit
     
  3. Remove your hand and enter code 0999, the light will flash three times and remain lit
  4. Press Channel Up once every two seconds to search for the correct code

  • Once the TV turns off, press Enter to select the code
     
  • Press TV Power to test the code, if the TV turns on, the remote is programmed
     
  • If the TV does not respond, try these steps again

     

    TV Input Control Code Search

    1. Cover the end of the TiVo remote control with your hand
       
    2. Hold down both the TiVo and TV Input buttons simultaneously until the light on the remote control remains lit
       
    3. Remove your hand and enter code 0999, the light will flash three times and remain lit
       
    4. Press Channel Up once every two seconds to search for the correct code
       
      • Once the TV changes inputs, press Enter to select the code
         
      • Press TV Input to test the code, if the TV turns on, the remote is programmed
         
    5. If the TV does not respond, try these steps again

     

    AV / Stereo Receiver Volume Control Code Search

    1. Cover the end of the TiVo remote control with your hand
       
    2. Hold down both the TiVo and Mute buttons simultaneously until the light on the remote control remains lit
       
    3. Remove your hand and enter code 0999, the light will flash three times and remain lit

    4. Press Channel Up once every two seconds to search for the correct code

      • Once the volume mutes, press Enter to select the code
         
      • Press TV Input to test the code, if the TV turns on, the remote is programmed
         
    5. If the TV does not respond, try these steps again

     

    Internal Information

    Commercial Agent Steps

    Financial Agent Steps

    Management Steps